Note: If you need more transmitter, please search 1018573
nThis product does not supply any instructions, please reference the description.
n
nFeatures:
n
nIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
n
n1. It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
n2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
n3. Extremely easy to set up and use.
n4. Compatible with 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
n
nInstructions:
n
n1. Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
n2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
n3. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
n
nOutput working way:
n
n1. Self-lock: connect the JP1 with the cutting out cap.
n2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
n3. Inter-lock: Connect the Jp2 with the Cutting out cap,
nJog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
nSelf -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
nInter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
n
nReceiver:
n
n1. Working voltage: DC12V
n2. Quiescent condition: Less than 6mA
n3. Working temperature: -40°c+80°c
n4. Receiver sensitivity: more than -105dBm
n5. Working frequency: 433mhz
n6. Output voltage: DC and AC is optional
n7. Output current: Less than 3A
n8. Max load current: 10A
n9. Dimensions: 72 x 52 x 26mm
n
nRemote control transmitter:
n
n1. Remote Distance: 200M
n2. Operating Voltage: DC 12V
n3. Frequency: 433mhz
n4. Operating Current: 13 mAh
n5. Code Type: Fixed code / Learning code
n6. Dimensions: 58 x 39 x 14mm
n
nPackage included:
n
n10 x Transimitter
n5 x Receiver
n
n